|
The branch is equipped with the modern equipment, enabling an opportunity
to test both separate units, and a product as a whole.
The following equipment is established:
1. The climatic chamber - low pressure air / dry heat
2. The climatic chamber - humidity / penetration a water / hydrochloric fog / SO2
3. The dust chamber
4. System of test for vibrations
5. System of test for shock loadings
6. System of test for stability radio-frequency handicapes
7. System of test for stability electrostatic categories
8. The climatic chamber - temperature / humidity
9. The chamber of growth of a mould
10. System of the COMPUTER of management of tests for influence of an environment.
The chamber of climatic tests for humidity (a hydrochloric fog)
| Manufacture: | Dynam Engineering Services Ltd (England) | | Description: | | | The chamber with an adjustable level of humidity and temperatures, means of input
Hydrochloric fog and water irrigation.
Range of humidity from + 350 up to 600 50 - 95 %
Range of temperatures 60 - 1000С
It is suitable for a free admission and an output of a case with sizes 1875 х 800м х 625 гл.
|
| | Photo: |
The dust chamber
| Manufacture: | Dynam Engineering Services Ltd (England) | | Description: | | | The chamber for modeling conditions of a dust storm.
The sizes of particles -50 300 mesh
The sizes of particles for tests -100 mesh
The admission at regulation t 0C -350 - 2 0C
The maximal relative humidity -60%
The sizes of a case an input and an output -1875 х 800 х 625
|
| | Photo: |
System for tests influence of vibrations
| Manufacture: | Dynam Engineering Services Ltd (England) | | Description: | | | Technological water of -200l/min
Load carrying-capacity -400kg
|
| | Photo: |
System for tests for shock loadings
| Manufacture: | Lansmont Corporation (England) | | Description: | | | Load carrying-capacity-400kg
|
| | Photo: |
System of tests for stability radio-frequency handicapes
| Manufacture: | Electro-Metrics Ltd (England) | | Description: | | | The area of a casing - 5,3м х 6,6м.
|
| | Photo: |
The chamber for check on stability a mould
| Manufacture: | Dynam Engineering Services Ltd (England) | | Description: | | | The chamber with regulation of temperature and humidity. The samples placed
In the chamber, are loaded by disputes of a mould for supervision over their growth.
Range of temperatures and the admission on t0C - 40-1000C ±10C
Relative humidity - 10 - 950C
Inner sizes (mm) - 610 х 610 х 610
|
| | Photo: |
|
|
Home
Manufacture
